NetBSD/hp300: Changing from Local Console to Serial Console

BOOTROM  Rev. 2.0  29 NOV 90
MC68040 Processor
Configuration EEPROM
HP-HIL
 RESET To Restart
 Self-Test Mode
HP-IB
DMA-C0
 Self-Test Mode
RAM 33554116 Bytes
HP98265 (SCSI S 32) at 5
HP98644 (RS-232) at 9
HP98642 (RS-232 MUX) at 11
HP98642 (RS-232 MUX) at 12
HP98625 (HS HP-IB) at 14
HP98265 (SCSI S 16) at 15
HP98643 (LAN) at 21, 08000910E8DA
HP PARALLEL at 23
 RESET To Restart, SPACE clears input    Select System, type RETURN
?
 System Search Mode
                                        :QUANTUM LPS525S, 506, 0
                                           1Z SYS_UBOOT
                                        :HP 2213A, 1503, 0
                                           2Z SYS_PBOOT

                                         Select System, type RETURN

C

                                        
                                           Configuration Control
                                        keys Control Class
                                        ---------------------------
                                          1  I/O Configuration
                                          2  Auto System Selection
                                        
                                          A  Abort without changes
                                        ---------------------------
                                        Type [key] RETURN ? 1  
                                        
                                          Configurable Interfaces
                                        keys Interface  Select Code
                                        ---------------------------
                                          1  LAN                31
                                          2  HP-IB
                                          3  SCSI                5
                                          4  HP PARALLEL        23
                                          5  RS-232              9
                                        
                                          N  store New values
                                          D  store Default values
                                            (then cycle SPU power)
                                          A  Abort without changes
                                        ---------------------------
                                        Type [key] RETURN ? 5  
                                        
                                             RS-232
                                        keys Feature         Value
                                        ---------------------------
                                          1  Select Code         9
                                          2  Interrupt Level     5
                                          3  Remote/Local        R
                                          4  Fast/Normal         N
                                          5  Modem Enable        Y
                                        
                                          X  eXit menu
                                        ---------------------------
                                        Type [key] RETURN ? 3   

                                         3  Remote/Local        L
                                        Type L or R RETURN ? R

                                             RS-232
                                        keys Feature         Value
                                        ---------------------------
                                          1  Select Code         9
                                          2  Interrupt Level     5
                                          3  Remote/Local        R
                                          4  Modem Enable        Y

                                          X  eXit menu
                                        ---------------------------
                                        Type [key] RETURN ? X

                                          Configurable Interfaces
                                        keys Interface  Select Code
                                        ---------------------------
                                          1  LAN                31
                                          2  HP-IB
                                          3  SCSI                5
                                          4  HP PARALLEL        23
                                          5  RS-232              9

                                          N  store New values
                                          D  store Default values
                                            (then cycle SPU power)
                                          A  Abort without changes
                                        ---------------------------
                                        Type [key] RETURN ? N