[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: pigu/mogu spec

Subject: Re: pigu/mogu spec
From: Tsubai Masanari <tsubai@iri.co.jp>
To: admin-ja@jp.netbsd.org
Date: Tue, 10 Jul 2001 19:34:04 +0900
Message-Id: <E15JuqC-00031Q-00@ruri.iri.co.jp>
In-Reply-To: <20010710120023S.jun@soum.co.jp>
Delivered-To: mailing list admin-ja@jp.netbsd.org
Mailing-List: contact admin-ja-help@jp.netbsd.org; run by ezmlm-idx

>加納さんに聞いたところ、以下のような構成だということですが、

なんか全然違うんですけど。:-)

pigu の dmesg がいまとれないのでこれだけ記憶で
pigu:
Pentium-II 300MHzぐらい, 128MB, 4G*2 + 18G*2

mogu:
NetBSD 1.5.1_ALPHA (MOGU) #0: Wed Mar 28 19:56:51 JST 2001
    tsubai@mogu:/usr/src/sys/arch/i386/compile/MOGU
cpu0: Intel Pentium Pro (686-class)
total memory = 127 MB
avail memory = 115 MB
using 2048 buffers containing 8192 KB of memory
BIOS32 rev. 0 found at 0xf7aa0
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82441FX PCI and Memory Controller (PMC) (rev. 0x02)
pcib0 at pci0 dev 1 function 0
pcib0: Intel 82371SB PCI-to-ISA Bridge (PIIX3) (rev. 0x01)
Intel 82371SB IDE Interface (PIIX3) (IDE mass storage, interface 0x80) at pci0 dev 1 function 1 not configured
tlp0 at pci0 dev 10 function 0: DECchip 21041 Ethernet, pass 2.1
tlp0: interrupting at irq 12
tlp0: Ethernet address 00:80:ad:71:82:6f
tlp0: 10baseT, 10base2, 10base5, 10baseT-FDX
ahc0 at pci0 dev 12 function 0
ahc0: interrupting at irq 15
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
scsibus0 at ahc0 channel 0: 16 targets, 8 luns per target
vga0 at pci0 dev 13 function 0: S3 ViRGE (rev. 0x06)
wsdisplay0 at vga0
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
npx0 at isa0 port 0xf0-0xff: using exception 16
apm0 at mainbus0: Power Management spec V1.2
biomask efe7 netmask ffe7 ttymask ffe7
scsibus0: waiting 2 seconds for devices to settle...
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 10.0MHz, offset = 0x8
ahc0: target 0 using tagged queuing
sd0 at scsibus0 target 0 lun 0: <IBM, DCAS-34330W, S65A> SCSI2 0/direct fixed
sd0: 4134 MB, 8205 cyl, 6 head, 171 sec, 512 bytes/sect x 8467200 sectors
ahc0: target 1 using 16bit transfers
ahc0: target 1 synchronous at 10.0MHz, offset = 0x8
ahc0: target 1 using tagged queuing
sd1 at scsibus0 target 1 lun 0: <IBM, DCAS-34330W, S65A> SCSI2 0/direct fixed
sd1: 4134 MB, 8205 cyl, 6 head, 171 sec, 512 bytes/sect x 8467200 sectors
ahc0: target 2 using 16bit transfers
ahc0: target 2 synchronous at 10.0MHz, offset = 0x8
ahc0: target 2 using tagged queuing
sd2 at scsibus0 target 2 lun 0: <IBM, DCAS-34330W, S65A> SCSI2 0/direct fixed
sd2: 4134 MB, 8205 cyl, 6 head, 171 sec, 512 bytes/sect x 8467200 sectors
ahc0: target 3 using 16bit transfers
ahc0: target 3 synchronous at 10.0MHz, offset = 0x8
ahc0: target 3 using tagged queuing
sd3 at scsibus0 target 3 lun 0: <IBM, DCAS-34330W, S65A> SCSI2 0/direct fixed
sd3: 4134 MB, 8205 cyl, 6 head, 171 sec, 512 bytes/sect x 8467200 sectors
warning: double match for boot device (sd0, sd1)
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
IP Filter: v3.4.9 initialized.  Default = pass all, Logging = enabled

lala:
NetBSD 1.5.1_BETA (LALA) #0: Wed Apr 11 21:36:50 JST 2001
    tsubai@lala:/a/1.5.1_BETA/src/sys/arch/i386/compile/LALA
cpu0: Intel Pentium II (Celeron) (686-class), 534.34 MHz
total memory = 510 MB
avail memory = 240 MB
using 11424 buffers containing 255 MB of memory
BIOS32 rev. 0 found at 0xfb0e0
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x1130 (rev. 0x02)
vga0 at pci0 dev 2 function 0: Intel product 0x1132 (rev. 0x02)
wsdisplay0 at vga0
ppb0 at pci0 dev 30 function 0: Intel 82801BA Hub-to-PCI Bridge (rev. 0x01)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
tlp0 at pci1 dev 4 function 0: DECchip 21140A Ethernet, pass 2.2
tlp0: interrupting at irq 11
tlp0: Ethernet address 00:00:f4:95:20:a4
lxtphy0 at tlp0 phy 0: LXT970 10/100 media interface, rev. 0
lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlp1 at pci1 dev 5 function 0: DECchip 21140A Ethernet, pass 2.0
tlp1: interrupting at irq 12
tlp1: Ethernet address 00:00:f4:90:82:ac
tlp1: 10baseT, 100baseTX, 10baseT-FDX, 100baseTX-FDX
tlp2 at pci1 dev 9 function 0: DECchip 21140A Ethernet, pass 2.0
tlp2: interrupting at irq 10
tlp2: DEC DE500-AA, Ethernet address 00:00:f8:05:47:02
nsphy0 at tlp2 phy 5: DP83840 10/100 media interface, rev. 0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801BA LPC Interface Bridge (rev. 0x01)
pciide0 at pci0 dev 31 function 1: Intel 82801BA IDE Controller (ICH2) (rev. 0x01)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <WDC AC36400L>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 6149 MB, 13328 cyl, 15 head, 63 sec, 512 bytes/sect x 12594960 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
wd1 at pciide0 channel 1 drive 0: <Maxtor 98196H8>
wd1: drive supports 16-sector pio transfers, lba addressing
wd1: 78167 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 160086528 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5
pciide0: secondary channel interrupting at irq 15
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5 (using DMA data transfers)
Intel 82801BA USB Controller (USB serial bus, revision 0x01) at pci0 dev 31 function 2 not configured
Intel 82801BA SMBus Controller (SMBus serial bus, revision 0x01) at pci0 dev 31 function 3 not configured
Intel 82801BA USB Controller (USB serial bus, revision 0x01) at pci0 dev 31 function 4 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
pckbc0 at isa0 port 0x60-0x64
npx0 at isa0 port 0xf0-0xff: using exception 16
apm0 at mainbus0: Power Management spec V1.2
biomask e3ef netmask ffef ttymask ffef
IPsec: Initialized Security Association Processing.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
IP Filter: v3.4.9 initialized.  Default = pass all, Logging = enabled

References:
- pigu/mogu spec
  - From: Jun Ebihara <jun@soum.co.jp>

Prev by Date: pigu/mogu spec
Next by Date: Re: Preparation of meeting
Prev by thread: pigu/mogu spec
Next by thread: Re: Preparation of meeting
Index(es):
- Date
- Thread