Re: NEWS5000 SCSI

[Masuda Hideo <h-masuda@ics.es.osaka-u.ac.jp>]

  どうも、桝田です。

tsubai> まだ書きかけですが、SPIFI SCSI ドライバーを
tsubai> ftp://nandra.iri.co.jp/pub/NetBSD/newsmips/
tsubai> においておきます。無謀な方はどーぞ。:-)

  無謀ではないのですが、逃避行動で突っ込んでみました。
  ついでに、/etc/rc.d/ 系にまで行ってみました(rc.localでちょっとはまった)。
  SONY NWS-5000TG 128MB でとりあえず動いています。

＃ NWB-5852A なんてのもあるので、if_de をもってくればどーにか
   ならんかなぁ、とか考え中。
===========================================================================
  桝田 秀夫＠情報メディア教育研究部門.サイバーメディアセンター.大阪大学
  [E-Mail] h-masuda@rd.ecip.osaka-u.ac.jp, h-masuda@ecs.cmc.osaka-u.ac.jp
===========================================================================
  
Copyright (c) 1996, 1997, 1998, 1999, 2000
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.4Y (BARADAGI) #7: Wed May 17 13:54:11 JST 2000
    h-masuda@baradagi.ootani.nagata.kobe.jp:/usr/syssrc/sys/arch/newsmips/compil
e/BARADAGI
total memory = 127 MB
avail memory = 114 MB
using 1651 buffers containing 6604 KB of memory
SONY NET WORK STATION, Model NWS-5000, Machine ID #12302
mainbus0 (root)
cpu0 at mainbus0: MIPS R4000 CPU Rev. 3.0 with MIPS R4010 FPC Rev. 0.0
cpu0: L1 cache: 8KB/16B Instruction, 8KB/16B Data, direct mapped
cpu0: L2 cache: 1024KB/64b mixed, no snooping
ap0 at mainbus0
cbasetx at ap0 slot2 addr 0xb8000000 not configured
mkclock0 at ap0 slot0 addr 0xbf881fe0
dmac0 at ap0 slot0 addr 0xbe200000: ctlnum = 0, map = 0xb4c20000, va = 0
dmac1 at ap0 slot0 addr 0xbe300000: ctlnum = 1, map = 0xb4c30000, va = 2000000
zsc0 at ap0 slot0 addr 0xbe900000
zstty0 at zsc0 channel 0 (console i/o)
zstty1 at zsc0 channel 1
fd at ap0 slot0 addr 0xbed20000 not configured
kb at ap0 slot0 addr 0xbf900000 not configured
lp at ap0 slot0 addr 0xbed30000 not configured
ms at ap0 slot0 addr 0xbf900014 not configured
sb at ap0 slot0 addr 0xbed00000 not configured
sn0 at ap0 slot0 addr 0xbe600000
sn0: Ethernet address 08:00:46:00:f2:21
spifi0 at ap0 slot0 addr 0xbe280000: SCSI ID = 7, using dmac0
scsibus1 at spifi0: 8 targets, 8 luns per target
spifi1 at ap0 slot0 addr 0xbe380000: SCSI ID = 7, using dmac1
scsibus2 at spifi1: 8 targets, 8 luns per target
xa at ap0 slot0 addr 0xb4900000 not configured
scsibus1: waiting 2 seconds for devices to settle...
sd0 at scsibus1 target 0 lun 0: <HITACHI, DK315C-11, H7H6> SCSI2 0/direct fixed
sd0: 1053 MB, 2488 cyl, 15 head, 57 sec, 512 bytes/sect x 2157600 sectors
cd0 at scsibus1 target 6 lun 0: <SONY, CD-ROM CDU-541, 4.3a> SCSI2 5/cdrom remov
able
scsibus2: waiting 2 seconds for devices to settle...
sd1 at scsibus2 target 0 lun 0: <HITACHI, DK315C-11, H7H6> SCSI2 0/direct fixed
sd1: 1053 MB, 2488 cyl, 15 head, 57 sec, 512 bytes/sect x 2157600 sectors
raidattach: Asked for 4 units
Kernelized RAIDframe activated
Searching for raid components...
IPsec: Initialized Security Association Processing.
boot device: <unknown>
root device: sd0
dump device (default sd0b): 
file system (default generic): 
root on sd0a dumps on sd0b
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying lfs...
mountroot: trying nfs...
mountroot: trying ffs...
root file system type: ffs
init: copying out path `/sbin/init' 11