Re: NetBSD/newsmips boot.fs

[Hidekichi Ookubo <ookubo@videa.or.jp>]

大久保＠videaです。

boot-newsmips-15T1.fs によるNWS-5000TGでのbootを
確認しました。

大丈夫なのではないかと



> bo fd()
NetBSD/newsmips Primary Boot
NetBSD/newsmips Secondary Boot
Booting fd()
1105832+2124272+153832 [89+57696+47083]=0x354e6c

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5T (INSTALL) #1: Wed Apr 11 21:48:46 JST 2001
    tsutsui@galant:/usr/src/sys/arch/newsmips/compile/INSTALL
total memory = 127 MB
avail memory = 114 MB
using 1651 buffers containing 6604 KB of memory
SONY NET WORK STATION, Model NWS-5000, Machine ID #12988
mainbus0 (root)
cpu0 at mainbus0: MIPS R4000 CPU (0x430) Rev. 3.0 with MIPS R4010 FPC Rev. 0.0
cpu0: L1 cache: 8KB/16B instruction, 8KB/16B data, direct mapped
cpu0: L2 cache: 1024KB/64B mixed, no snooping
ap0 at mainbus0
tlp0 at ap0 slot1 addr 0xb8800000: DECchip 21140A Ethernet, pass 1.2
tlp0: broken MicroWire interface detected; setting SROM size to 1Kb
tlp0: Ethernet address 00:00:00:00:03:00
mkclock0 at ap0 slot0 addr 0xbf881fe0
dmac0 at ap0 slot0 addr 0xbe200000: ctlnum = 0, map = 0xb4c20000, va = 0
dmac1 at ap0 slot0 addr 0xbe300000: ctlnum = 1, map = 0xb4c21000, va = 200000
zsc0 at ap0 slot0 addr 0xbe900000
zstty0 at zsc0 channel 0 (console i/o)
zstty1 at zsc0 channel 1
esccf at ap0 slot2 addr 0xb8d00000 not configured
fd at ap0 slot0 addr 0xbed20000 not configured
kb0 at ap0 slot0 addr 0xbf900000
wskbd0 at kb0
lbp at ap0 slot4 addr 0xb8200000 not configured
lp at ap0 slot0 addr 0xbed30000 not configured
ms at ap0 slot0 addr 0xbf900014 not configured
sb at ap0 slot0 addr 0xbed00000 not configured
sn0 at ap0 slot0 addr 0xbe600000
sn0: Ethernet address 08:00:46:00:f7:b5
spifi0 at ap0 slot0 addr 0xbe280000: SCSI ID = 7, using dmac0
scsibus1 at spifi0: 8 targets, 8 luns per target
spifi1 at ap0 slot0 addr 0xbe380000: SCSI ID = 7, using dmac1
scsibus2 at spifi1: 8 targets, 8 luns per target
xafb0 at ap0: 1280 x 1024, 8bpp
wsdisplay0 at xafb0
scsibus1: waiting 2 seconds for devices to settle...
sd0 at scsibus1 target 0 lun 0: <HITACHI, DK315C-11, H7H6> SCSI2 0/direct fixed
sd0: 1053 MB, 2488 cyl, 15 head, 57 sec, 512 bytes/sect x 2157600 sectors
cd0 at scsibus1 target 6 lun 0: <SONY, CD-ROM CDU-541, 4.3a> SCSI2 5/cdrom removable
scsibus2: waiting 2 seconds for devices to settle...
sd1 at scsibus2 target 0 lun 0: <HITACHI, DK315C-11, H7H6> SCSI2 0/direct fixed
sd1: 1053 MB, 2488 cyl, 15 head, 57 sec, 512 bytes/sect x 2157600 sectors
md0: internal 2048 KB image area
boot device: <unknown>
root on md0a dumps on md0b
root file system type: ffs
erase ^H, werase ^W, kill ^U, intr ^C, status ^T
Terminal type? [vt100] xterm
Erase is backspace.
#