[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: YMF driver
どなたか、ちょっと教えて下さい。
> 逆ですね。1フレーム=256/48000秒固定で計算するようにしたとこ
> ろ、若干のノイズは乗るもののなんとか聞けるようになりました。
>
> ftp://ftp.netbsd.org/pub/NetBSD/misc/minoura/ymf-m-20010306.tar.gz
私のVAIO C1XFではbus_dmamem_allocに失敗するのですが、
カーネルのconfigとかでなんとかなるものなのでしょうか。
dmesgの出力を最後につけておきます。
--
iかわもと よしひさ!
kawamoto@es.osaka-u.ac.jp
NetBSD 1.5S (RERUN) #323: Wed Mar 7 16:37:40 JST 2001
kawamoto@rerun.tenjin.org:/var/src/sys/arch/i386/compile/RERUN
cpu0: Intel Celeron (Mendocino) (686-class), 397.02 MHz
cpu0: I-cache 16K 32b/line 4-way, D-cache 16K 32b/line 2/4-way
cpu0: L2 cache 256K 32b/line 4-way
cpu0: features 183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 183f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX,FXSR>
total memory = 191 MB
avail memory = 173 MB
using 2477 buffers containing 9908 KB of memory
biostramp installed @ 1000
BIOS32 rev. 0 found at 0xfd880
PCI BIOS rev. 2.1 found at 0xfd99e
pcibios: config mechanism [1][x], special cycles [x][x], last bus 1
PCI IRQ Routing Table rev. 1.0 found at 0xfdf40, size 160 bytes (8 entries)
PCI Interrupt Router at 000:07:0 (Intel 82371FB PCI-to-ISA Bridge (PIIX))
PIR Entry 0:
Bus: 0 Device: 1
INTA: link 0x60 bitmap 0x0200
INTB: link 0x61 bitmap 0x0200
INTC: link 0x62 bitmap 0x0200
INTD: link 0x63 bitmap 0x0200
PIR Entry 1:
Bus: 0 Device: 7
INTA: link 0x00 bitmap 0x0000
INTB: link 0x00 bitmap 0x0000
INTC: link 0x00 bitmap 0x0000
INTD: link 0x63 bitmap 0x0200
PIR Entry 2:
Bus: 0 Device: 8
INTA: link 0x63 bitmap 0x0200
INTB: link 0x00 bitmap 0x0000
INTC: link 0x00 bitmap 0x0000
INTD: link 0x00 bitmap 0x0000
PIR Entry 3:
Bus: 0 Device: 9
INTA: link 0x62 bitmap 0x0200
INTB: link 0x00 bitmap 0x0000
INTC: link 0x00 bitmap 0x0000
INTD: link 0x00 bitmap 0x0000
PIR Entry 4:
Bus: 0 Device: 11
INTA: link 0x60 bitmap 0x0200
INTB: link 0x00 bitmap 0x0000
INTC: link 0x00 bitmap 0x0000
INTD: link 0x00 bitmap 0x0000
PIR Entry 5:
Bus: 0 Device: 12
INTA: link 0x61 bitmap 0x0200
INTB: link 0x00 bitmap 0xdef8
INTC: link 0x00 bitmap 0x0000
INTD: link 0x00 bitmap 0x0000
PIR Entry 6:
Bus: 0 Device: 10
INTA: link 0x61 bitmap 0x0200
INTB: link 0x00 bitmap 0x0000
INTC: link 0x00 bitmap 0x0000
INTD: link 0x00 bitmap 0x0000
PIR Entry 7:
Bus: 0 Device: 13
INTA: link 0x61 bitmap 0x0200
INTB: link 0x00 bitmap 0x0000
INTC: link 0x00 bitmap 0x0000
INTD: link 0x00 bitmap 0x0000
pciintr_link_fixup: PIRQ 0x00 already connected to IRQ 9
pciintr_link_fixup: PIRQ 0x01 not connected, assigning IRQ 9
pciintr_link_fixup: PIRQ 0x02 not connected, assigning IRQ 9
pciintr_link_fixup: PIRQ 0x03 not connected, assigning IRQ 9
pciintr_link_route: route of PIRQ 0x00 -> IRQ 9 preserved BIOS setting
------------------------------------------
device vendor product pin PIRQ IRQ stage
------------------------------------------
000:07:2 0x8086 0x7112 D 0x03 9 1 fixed up
000:08:0 0x104d 0x8039 A 0x03 9 1 fixed up
000:09:0 0x1073 0x0010 A 0x02 9 1 already assigned
000:10:0 0x136b 0xff01 A 0x01 9 1 fixed up
000:11:0 0x14f1 0x1036 A 0x00 9 0 already assigned
000:12:0 0x1180 0x0475 A 0x01 9 1 fixed up
------------------------------------------
PCI bridge 0: primary 0, secondary 1, subordinate 1
PCI bridge 1: primary 0, secondary 2, subordinate 2
PCI bus #2 is the last bus
[System BIOS Setting]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x8086 0x7190
10h mem 0x40000000 0x01000000
[OK]
000:01:0 0x8086 0x7191
[OK]
000:07:0 0x8086 0x7110
[OK]
000:07:1 0x8086 0x7111
20h port 0x0000fcf0 0x00000010
[OK]
000:07:2 0x8086 0x7112
20h port 0x0000fcc0 0x00000020
[OK]
000:07:3 0x8086 0x7113
[OK]
000:08:0 0x104d 0x8039
10h mem 0xfedff000 0x00000800
14h mem 0xfedffc00 0x00000200
[OK]
000:09:0 0x1073 0x0010
10h mem 0xfedf0000 0x00008000
14h port 0x0000fc40 0x00000040
18h port 0x0000fcec 0x00000004
[OK]
000:10:0 0x136b 0xff01
10h mem 0xfedff800 0x00000200
[OK]
000:11:0 0x14f1 0x1036
10h mem 0xfede0000 0x00010000
14h port 0x0000fce0 0x00000008
[OK]
000:12:0 0x1180 0x0475
10h mem 0x00000000 0x00001000
[NG]
001:00:0 0x10c8 0x0005
10h mem 0xfd000000 0x01000000
14h mem 0xfe800000 0x00400000
18h mem 0xfec00000 0x00100000
[OK]
--------------------------[ 1 devices bogus]
WARNING: can't reserve area for I/O APIC.
Physical memory end: 0x0bfe8000
PCI memory mapped I/O space start: 0x0c000000
[PCIBIOS fixup stage]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x8086 0x7190
10h mem 0x40000000 0x01000000
[OK]
000:01:0 0x8086 0x7191
[OK]
000:07:0 0x8086 0x7110
[OK]
000:07:1 0x8086 0x7111
20h port 0x0000fcf0 0x00000010
[OK]
000:07:2 0x8086 0x7112
20h port 0x0000fcc0 0x00000020
[OK]
000:07:3 0x8086 0x7113
[OK]
000:08:0 0x104d 0x8039
10h mem 0xfedff000 0x00000800
14h mem 0xfedffc00 0x00000200
[OK]
000:09:0 0x1073 0x0010
10h mem 0xfedf0000 0x00008000
14h port 0x0000fc40 0x00000040
18h port 0x0000fcec 0x00000004
[OK]
000:10:0 0x136b 0xff01
10h mem 0xfedff800 0x00000200
[OK]
000:11:0 0x14f1 0x1036
10h mem 0xfede0000 0x00010000
14h port 0x0000fce0 0x00000008
[OK]
000:12:0 0x1180 0x0475
10h mem 0x0c000000 0x00001000
[OK]
--------------------------[ 0 devices bogus]
mainbus0 (root)
pnpbios0 at mainbus0: nodes 14, max len 210
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x03)
ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Neomagic MagicMedia 256AV VGA (rev. 0x20)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <IBM-DARA-212000>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 11513 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 23579136 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
pciide0: disabling secondary channel (no drives)
uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x03) at pci0 dev 7 function 3 not configured
Sony CXD3222 OHCI IEEE 1394 Host Controller (Firewire serial bus, interface 0x10, revision 0x02) at pci0 dev 8 function 0 not configured
ymf0 at pci0 dev 9 function 0: Yamaha 744 (DS-1S) Audio (rev. 0x02)
ymf0: interrupting at irq 9
ymf0: couldn't alloc DSP Control Data
ymf0: download microcode failed
unknown vendor 0x136b product 0xff01 (miscellaneous multimedia, revision 0x01) at pci0 dev 10 function 0 not configured
Conexant Systems product 0x1036 (miscellaneous communications, revision 0x08) at pci0 dev 11 function 0 not configured
cbb0 at pci0 dev 12 function 0: Ricoh 5C475 PCI-CardBus bridge (rev. 0x80)
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsiprobe: intellimode -> 6
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lptprobe: mask ff data 55 failed
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
cbb0: interrupting at irq 9
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
apm0 at mainbus0: Power Management spec V1.2
apm: 1 batteries, global suspend, rtimer suspend, internal standby
biomask effd netmask effd ttymask ffff
IPsec: Initialized Security Association Processing.
pcmcia0: CIS version PCMCIA 2.0 or 2.1
pcmcia0: CIS info: 3Com Corporation, 3C589D, TP/BNC LAN Card Ver. 2a, 000002
pcmcia0: Manufacturer code 0x101, product 0x589
pcmcia0: function 0: network adapter, ccr addr 10000 mask 3
pcmcia0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 4, iospace 0-f; io8 io16 irqlevel
pcmcia0: function 0, config table entry 3: I/O card; irq mask ffff; iomask 4, iospace 0-f; io8 io16 irqlevel
ep0 at pcmcia0 function 0: 3Com 3c589 10Mbps Ethernet
ep0: address 00:60:97:8b:36:b9, 8KB byte-wide FIFO, 5:3 Rx:Tx split
ep0: 10baseT, 10base5, 10base2 (default 10baseT)
boot device: wd0
root on wd0a dumps on wd0b
mountroot: trying coda...
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying ntfs...
mountroot: trying nfs...
mountroot: trying lfs...
mountroot: trying ext2fs...
mountroot: trying ffs...
root file system type: ffs
init: copying out flags `-s' 3
init: copying out path `/sbin/init' 11